| 規格Specifications | ||
| 機型項目 Item Model | 單位 | TOM-SP1503 |
| 工作臺面尺寸寬×長 table size（LxW） | mm | 1200×3000 |
| 工作臺移動X軸行程 X-axis travel | mm | 3000 |
| 主軸滑座移動Y軸行程 Y-axis travel | mm | 1650 |
| 主軸上下移動Z軸行程 Z-axis travel | mm | 800 |
| 龍門寬度 size of machine | mm | 1650 |
| 主軸端面至工作臺面距離 spindle nose to table | mm | 175~975 |
| 工作臺T型槽,尺寸×間距 table-T-slot | mm | 7-22×150 |
| 主軸端錐度 spindle taper | mm | BT50/Φ190 |
| 主軸傳動齒輪頭 spindle gear | rpm | zui高轉速3000rpm |
| 主軸傳動ZF減速＋直聯 spindle drive ZF reduction | rpm | zui高6000rpm，傳動比1：1 ；4：1 |
| 主軸傳動直聯 spindle straight transfer | rpm | zui高轉速6000rpm |
| XYZ軸滾珠絲桿規格XYZ-axis ball-screw size | mm | 6310x5010x5010 |
| X軸導軌規格 X-axis rail size | mm | 雙“V”滑軌 |
| Y軸導軌規格 Y-axis rail size | mm | 重載滾柱直線導軌55MM |
| Z軸導軌規格 Z-axis rail size | mm | 矩型滑軌 |
| X/Y/Z軸快速進給 X/Y/Z axis rapid feed | m/min | 12x20x12 |
| 三軸切削進給 three axis working rapid speed | mm/min | 1-8000 |
| 定位精度 positioning accuracy | mm | ±0.015 |
| 重復定位精度 repeat positioning accuracy | mm | ±0.003 |
| 控制器系統 control system | M70A | MITSUBISHI-M70A |
| 主軸電機 spindle motor | kw | 22 |
| X軸伺服電機 X-axis servo-actuator | nm | 40 |
| Y軸伺服電機 Y-axis servo-actuator | nm | 30 |
| Z軸伺服電機（抱閘）Z-axis servo-actuator | nm | 30 |
| 氣壓要求pneumatic source requirement | Kg/Cm2 | 6 |
| 工作臺承重table load capacity | kgs | 5000 |
| 電力需求power consumption | kva | 45 |
| 機臺重量weight（approx） | kgs | 29500 |
| 我公司因技術研究需要，保有隨時修改技術參數與外形的權利，變更時恕不另行通知。 | ||
| We reserve the rights on the designing, colors,specification and termination of use of our products.Changes to these factors will not be notified. | ||